Centurion D5 Betriebsanweisung

Latest Revision: 12.03.2003Document Ref.: 1010148fProduct Code: CP70SR5D3, D5, A5SLIDING GATEAUTOMATIONUSER GUIDE

AUTOMATIC CLOSING(OPTIONAL)The system has the facility to automatically close the gate after it has been opened. The time that the gate remains open i

- LED flashes twice every 2 seconds when mains supply to gate system has failed (D3/5 only).- LED flashes three times every 2 seconds to indicate a ba

momentarily the light will switch on for the light timer period and automatically switch off. By pressing and holding the pushbutton down for 3 second

HOLIDAY LOCKOUT (OPTIONAL)A Keyswitch can be connected to the gate system that will allow the system to be totally immobilised. The keyswitch is moun

while the gate is open the "Auto-close" will restart its countdown. If the gate is activated while the gate is closing the gate will reopen.

Basic MaintenanceThe CENTURION system is designed to be maintenance free. However, there are some basic checks that should be carried out regularly (

POWER SUPPLYThe D3/D5/A5 operators have power supplies which are separate to the controllers (CP84E - D3/D5; CP83E - A5; CP89 - FAAC 746/844). The pow

TECHNICAL DATA 746 844 844 3 PHASEPOWER SUPPLY 230V~ (+6% - 10%) 50Hz 230V~ (+6% - 10%) 50Hz 380V, 3 Phase 4 wire availableABSORBED POWER 300W 650W 95

Declaration of ConformityDECLARATION OF CONFORMITYaccording to ISO/IEC Guide 22 and EN 45014Manufacturer’s Name: CENTURION SY

CENTURIONCENTURION5 Secs120 Secs3 Secs5 Secs4350mm30mmPED. AUTOCLOSE TIMECOURTESY LIGHT TIMESENSITIVITYCOLLISIONHighHighMediumLowAUTOCLOSE OVER-RIDE P

Company Profile Product GuaranteeCENTURION SYSTEMS is a manufacturing company committed to providing reliable, cost effective solutions in the field o

Centurion Sliding Gate Operators User Guide - 3INTRODUCTION 4PRINCIPLES OF OPERATION 4NORMAL OPERATION 6Radio Transmitter 6Intercom pushbutton 7Pedest

IntroductionThis guide highlights the features and operation of CENTURION SLIDING GATE OPERATORS to ensure that YOU, the user, get the most from your

FAAC 844 3 PHASE OPERATOR - Heavy duty industrial AC operator for gates weighing up to 2200kg.The principal features of both systems are as follows:Th

The gates can be opened or closed in the following way:RADIO TRANSMITTERA handheld radio transmitter, carried in the motor car, sends a coded signal t

INTERCOM PUSHBUTTON Visitor outside gate requests entrance. Gate opened from intercom pushbutton inside house.Most automatic gate installation

The gate will open approximately 1 metre and then stop. After 5 seconds the gate will automatically close.The gate can be held open by keeping the ke

Gate OpeningN.B.: (For CENTURION A5, D3 and D5 models only). If the gate is obstructed repeatedly 4 ti